Fuzzy Floor
 Cage Level
Habitat Extender

Parts and Installation

The Fuzzy Floor Cage Level for the Marshall Mansion consists of:

  • One (1) Fuzzy Floor Cage Level
  • Two (2) long and two (2) short dowels for the front and back of the cage*
  • Four (4) equal length dowels – two (2) per cage side*
  • One packet containing 4 short dowels to aid in installation

    • *The Basement model has double the amount of dowels

      The Fuzzy Floor Cage Level may be installed at any height, although the level at which the doors hinge will interfere with opening the door.

      The system may be installed through the door openings without affecting the operation or security of the door.

      Simply thread the dowel through the loops at the door opening until the dowel meets up with the cage bars again. (See Picture)
    Fuzzy Floor Cage Level          Patent Pending

    The loops fit through the vertical cage bars, extending to the outside of the cage where the acrylic dowels are inserted to secure the floor to the cage. (See above Picture)

    For easy installation, temporarily secure your Fuzzy Floor to the cage at all 4 corners by using the 4 short installation dowels provided.

    *Basement model installation-start with lower set of web loops

    Begin by putting the Fuzzy Floor inside the cage. Insert a short dowel in the end loop on the long side. At the desired height, turn the dowel vertically so it will go through the cage bars in the first space from the corner at the back of the cage. Turn dowel back horizontal so it locks in place against the cage bars. (See Picture 2-3)


    (Pic 2)

    (Pic 3)

    The permanent dowels may now be installed for the back from the outside of the cage. Using the short dowel, starting in the 7th bar space from the corner (See Picture 4), thread the dowel through the 4 end loops in every other space. Hold the temporary dowel level and push it through with the permanent dowel. (See Picture 5)


    (Pic 4)

    (Pic 5)

    For the sides of the cage, use 2 of the 4 equal length dowels per side. Working from the center out (Picture 6) skip the two center spaces on the cage side and work towards the corners. ( Picture 7)


    (Pic 6)

    (Pic 7)

    Finish connecting the floor level to the cage by securing the front loops using the remaining long and short dowel.


    Fuzzy Floor
     Cage Level
    Habitat Extender

    Maintenance and Washing Instructions

    The Fuzzy Floor system may be cleaned quickly and easily while it is installed in the cage by vacuuming the surface using the upholstery attachment on a vacuum cleaner. It is natural for the interior lining to shed a little as the floor gets worn in.

    For thorough cleaning, machine wash on cold and dry on low. The materials used are preshrunk although washing on hot or drying on high may cause additional shrinkage making reinstallation harder than necessary. Pocket and Basement models may be pulled inside out for washing although it is not usually necessary. Inserting the vacuum nozzle into the center prior to machine washing is generally sufficient. *

    *Applies to Pocketed and Basement Models.

    Acrylic dowels may be safely washed in hot soapy water or sanitized with any pet friendly sanitizer.

    If you have any problems or questions please feel free to call me @ (360) 470-3816 or email me karen@ferretaffair.com

    .